4 csatornás távirányító, 4 csatornás relés vevő védődobozban
Nagy hatótávú marok távirányítóval, 9V-os elemmel működik (szükséges), a stabilabb és hosszabb működésért
Univerzális felhasználásra, az összes alapkapcsolás megvalósítható vele: mono/bistabil/váltó módok,
szabványos 3 lábú NO/NC relékkel, így zárás és megszakítás is vezérelhető.
Jelllemzők:
széles körű felhasználása, világítások, szivattyúk, motorok, redőnyök, garázskapuk, stb...
Specifikáció:
Vevőegység: Model : TAD-T70
- Working voltage : 12VDC
- Static current : ≤ 9mA
- relay contact capacity : 10A 250VAC | 10A 30VDC (rezisztív terhelés mellett, induktív és motorokhoz 60/40% )
- Terhelhető: világítás, led, motor, értelemszerűen a fogyasztó típusától függően a relének megfelelően kisebb
-Output: relay common / normally open / normally closed (szabványos: záró vagy megszakító állás)
- Load power: ≤ 40W Single
- csatornák: 4
- Operating frequency : 315MHz/433MHz
Távirányító:
- Remote distance: no interference space max 500-1000 m ( tájékoztató jellegű max. hatótáv, optimális körülmények között: szabad rálátás, stabil táp, feszített antennák, stb. esetén)
- Elem: 9V
- csatorák: 4
- kapcsolóval, kihúzható hagyományos antennával
Párosítás szerint:
Tanuló vevőegység, fix kódos távirányítók. (Vevőegység nyomógombbal tanul, távirányítókban forrasztással változtatható kód, nagyszámú kódlehetőség: 3^8)
Működési módok szerint, mind a 4 csatornán, jumperrel vagy forrasztással változtatható, alapból L (váltó módban áll):
T: bistabil (self-locking)
M: monostabil (moment, jog)
L: váltó mód (latch, interlock)
Self-locking control mode : Click the button corresponding relay switches in the same key , click the
corresponding relay is switched off , ABCD four independently -off .
Jog type control mode : Long press buttons corresponding relay switches , release the button
corresponding to the relay is switched off , 4-way can not work independently , each only way to work ;
Interlocked control mode: Press the A button A and lock has been switched on, press the B button to
disconnect A , B and lock has been switched on, press the C key to disconnect the B, C Lu has been turned
ON and locked press the D key to disconnect C, D Road has been turned on and turned the lock , you can
only turn all the way , and as fans gear . )
Tips: Remote control buttons Press only one button can not hold down two or more keys simultaneously ,
otherwise it will affect the normal work of mutual interference .
Learning the code method : Click the button to learn , indicator lights , release the button to
learn , within 15 seconds, press any button on the remote control , the receiver learn LED flash , remote
control and receiver success of the code . after 15 seconds if no transmitter signal is input to learn,
learn about LED flash , auto- exit learning state , supports up to 30 different remote control code
learning the code , when learning to 31 remote will automatically clear the first remote control
controller .
Clear the right code method ; tight hold button and hold the receiver to learn , learning indicator
lights After about 8 seconds , until the learn indicator light goes out , release the learn button ,
remove all code learning remote control.
Csomagban:
- 4 cs. veveőegység védődobozzal
- 4 cs. távirányító (9V elem szükséges hozzá, külön rendelhető)